|
Seafari Modular SFM
|
+-15% 850 psi / 56 Bar, 77oF / 25oC & 35,000 ppm TDS typical sea water
| Model |
Production Per Hour
|
Production Per 24 Hours
|
|
gallons/liters
|
gallons/liters
|
|
| SFM 450-1 |
19 / 71
|
450 / 1,703
|
| SFM 700-1 |
29 / 110
|
700 / 2,650
|
| SFM 900-1 |
38 / 142
|
900 / 3,407
|
| SFM 900-2 |
38 / 142
|
900 / 3,407
|
| SFM 1400-2 |
58 / 221
|
1,400 / 5,300
|
| SFM 1800-2 |
75 / 284
|
1,800 / 6,814
|
Salt Rejection (Chloride Ion):
Minimum 99.2%, Average 99.4%
Product Water Temperature:
Ambient to feed water temperature.
Salinity Monitoring:
The salinity monitoring components of the system give a continuous readout in micromhos per cubic centimeter, are temperature compensated, and of a fail safe design.
Salinity Range:
Designed for seawater use up to 50,000 ppm TDS (Nacl)
(typical seawater salinity is 35,000 ppm.)
Temperature Range:
Min. 33oF / .5oC Max. 122oF / 50oC
System Feed Water:
Flow: 50Hz, 3.5 gpm / 13.2 lpm; 60Hz, 3 - 4.2 gpm / 11.4 - 15.9 lpm
Reverse Osmosis Membrane:
High Rejection/High Yield aromatic tri-polyamind, thin film composite, spiral wound, single pass reverse osmosis membrane element.
Chlorine Tolerance:
0.1 ppm
pH Range:
3-11 (typical seawater pH is 8)
System Pressure:
| Feed Water: | Minimum: | 6 psi / .41 bar / .42 Kg/cm2 |
| Maximum: | 35 psi / 2.41 bar / 2.46 Kg/cm2 | |
System Operation: Typical seawater has a salinity of 35,000 ppm TDS and an average temperature of 77oF / 25oC.
Nominal: 850 psi / 56.5 bar / 57.66 Kg/cm2. (Brackish varies w/ppm)
|
Model Number
|
Weight
|
|
SFM 450-1 |
118 lbs / 54 Kg |
External Installation Water Connections:
Pipe sizes to be supplied by the installer for connection of the Horizon Reverse Osmosis supplied components.
| Feed Inlet: | 3/4" MNPT (Male National Pipe Thread, Amer. Std) |
| Brine Discharge: | 1/2" FNPT (Male National Pipe Thread, Amer. Std) |
| Product: | 3/8" FNPT (Female National Pipe Thread, Amer. Std) |
Electrical Motor Specifications:
(HP = Horse Power; FLA = Full Load Amperes, LRA = Locked Rotor Amperes @ Start Up)
450-1 & 900-2 Systems:
| Phase | Hz | VAC | HP | FLA | LRA |
| Single | 50 | 110 | 2.2 | 21 | 121 |
| Single | 50 | 220 | 2.2 | 10.5 | 60.5 |
| Three | 50 | 220 | 3.0 | 9.2 | 78 |
| Three | 50 | 380 | 3.0 | 4.6 | 39 |
| Single | 60 | 115 | 2.2 | 18 | 94 |
| Single | 60 | 230 | 2.2 | 9 | 47 |
| Three | 60 | 230 | 3.0 | 8.2 | 70 |
| Three | 60 | 460 | 3.0 | 4.1 | 35 |
High Pressure Pump Electric Motor:
700-1 & 1400-2 and 900-1 & 1800-2 Systems:
| Phase | Hz | VAC | HP | FLA | LRA |
| Single | 50 | 110 | 2.2 | 21 | 121 |
| Single | 50 | 220 | 2.2 | 10.5 | 60.5 |
| Three | 50 | 220 | 3.0 | 9.2 | 78 |
| Three | 50 | 380 | 3.0 | 4.6 | 39 |
| Single | 60 | 115 | 2.6 | 21.2 | 109 |
| Single | 60 | 230 | 2.6 | 10.6 | 54.5 |
| Three | 60 | 230 | 3.0 | 8.2 | 70 |
| Three | 60 | 460 | 3.0 | 4.1 | 35 |
Booster Pump Motors:
| Phase | Hz | VAC | HP | FLA | LRA |
| Single | 50/60 | 115 | .5 | 7.4 | 34 |
| Single | 50/60 | 220/230 | .5 | 3.7 | 17 |
| Three | 50/60 | 220/230 | .5 | 2 | 12 |
| Three | 50/60 | 380/460 | .5 | 1 | 6 |
Recommended Circuit Breaker:
|
Operating Voltage Hz & Phase
|
Rec. Circuit Breaker Size |
|
|
115 VAC, Single Phase |
35 Amps |