SEAFARI VERSATILE - SPECIFICATIONS

MODELS PRODUCTION / HR PRODUCTION / 24 HRS WEIGHT
SFC 450-1 19 Gal / 71 Lit 450 Gal / 1,703 Lit 118 lbs / 54 kg
SFC 700-1 29 Gal / 110 Lit 700 Gal / 2,650 Lit 125 lbs / 57 kg
SFC 900-1 38 Gal / 142 Lit 900 Gal / 3,407 Lit 136 lbs / 62 kg
SFC 900-2 38 Gal / 142 Lit 900 Gal / 3,407 Lit 136 lbs / 62 kg
SFC 1400-2 58 Gal / 221 Lit 1400 Gal / 5,300 Lit 147 lbs / 67 kg
SFC 1800-2 75 Gal / 284 Lit 1800 Gal / 6,814 Lit 150 lbs / 68 kg

High Pressure Pump and Booster Pump Combined Amp Draw:

PHASE Hz VOLTAGE HP RUNNING AMPS START UP AMPS
1 50/60 115 2.5 30 103
1 50/60 220 2.5 15 52
3 50/60 220 3 12 30
3 50/60 440 3 6 15

CONFIGURATIONS

 

  • Product Water Produced per hour of operation: +-15% 850 psi / 56 Bar, 77oF / 25oC & 35,000 ppm TDS typical sea water
  • Salt Rejection (Chloride Ion): Minimum 99.2%, Average 99.4%
  • Product Water Temperature: Ambient to feed water temperature.
  • Salinity Monitoring: The salinity monitoring components of the system give a continuous readout in micromhos per cubic centimeter, are temperature compensated, and of a fail safe design.
  • Salinity Range: Designed for seawater use up to 50,000 ppm TDS (Nacl) (typical seawater salinity is 35,000 ppm.)
  • Temperature Range: Min. 33oF / .5oC Max. 122oF / 50oC
  • System Feed Water: Flow: 50Hz, 3.5 gpm / 13.2 lpm; 60Hz, 3 - 4.2 gpm / 11.4 - 15.9 lpm
  • Reverse Osmosis Membrane: High Rejection/High Yield aromatic tri-polyamind, thin film composite, spiral wound, single pass reverse osmosis membrane element.
  • Chlorine Tolerance: 0.1 ppm
  • pH Range: 3-11 (typical seawater pH is 8)
  • System Pressure:
    Feed Water
    Minimum: 6 psi / .41 bar / .42 Kg/cm2
    Maximum: 35 psi / 2.41 bar / 2.46 Kg/cm2
    System Operation
    Seawater @ 35,000 ppm & 77° F / 25° C
    Nominal: 850 psi / 56.5 bar / 57.66 Kg/cm2. (Brackish varies w/ppm)
  • External Installation Water Connections: Pipe sizes supplied by the installer for connection of Horizon Reverse Osmosis supplied components.
    Feed Inlet: 3/4" MNPT (Male National Pipe Thread, Amer. Std)
    Brine Discharge: 1/2" FNPT (Male National Pipe Thread, Amer. Std)
    Product: 3/8" FNPT (Female National Pipe Thread, Amer. Std)