SEAFARI QUEST - SPECIFICATIONS

MODELS PRODUCTION / HOUR WEIGHT   SUC 12V SUC 24V Motor HP 12/24V
Quest 200 8 Gal / 32 Lit 115 lbs / 52 kg   54 27 0.3
Quest 400 17 Gal / 63 Lit 120 lbs / 54 kg   60 42 0.3
Quest 600 25 Gal / 95 Lit 125 lbs / 57 kg   99 55 0.3

Vane Pump - Electrical

MODEL Feed Flow - GPM Product - GPD Normal Amp
Draw 12V
Normal Amp
Draw 24V
Quest 200 1.7 200 21 10.5
Quest 400 2.3 400 26 13
Quest 600 3.2 600 38 20

CONFIGURATIONS

 

  • Product Water Produced per hour of operation: +-15% 850 psi / 56 Bar, 77oF / 25oC & 35,000 ppm TDS typical sea water
  • Salt Rejection (Chloride Ion): Minimum 99.2%, Average 99.4%
  • Product Water Temperature: Ambient to feed water temperature.
  • Salinity Monitoring: The salinity monitoring components of the system give a continuous readout in micromhos per cubic centimeter, are temperature compensated, and of a fail safe design.
  • Salinity Range: Designed for seawater use up to 50,000 ppm TDS (Nacl) (typical seawater salinity is 35,000 ppm.)
  • Temperature Range: Min. 33oF / .5oC Max. 122oF / 50oC
  • System Feed Water: Flow: 50Hz, 3.5 gpm / 13.2 lpm; 60Hz, 3 - 4.2 gpm / 11.4 - 15.9 lpm
  • Reverse Osmosis Membrane: High Rejection/High Yield aromatic tri-polyamind, thin film composite, spiral wound, single pass reverse osmosis membrane element.
  • Chlorine Tolerance: 0.1 ppm
  • pH Range: 3-11 (typical seawater pH is 8)
  • System Pressure:
    Feed Water
    Minimum: 6 psi / .41 bar / .42 Kg/cm2
    Maximum: 35 psi / 2.41 bar / 2.46 Kg/cm2
    System Operation
    Seawater @ 35,000 ppm & 77° F / 25° C
    Nominal: 850 psi / 56.5 bar / 57.66 Kg/cm2. (Brackish varies w/ppm)
  • External Installation Water Connections: Pipe sizes supplied by the installer for connection of Horizon Reverse Osmosis supplied components.
    Feed Inlet: 3/4" MNPT (Male National Pipe Thread, Amer. Std)
    Brine Discharge: 1/2" FNPT (Male National Pipe Thread, Amer. Std)
    Product: 3/8" FNPT (Female National Pipe Thread, Amer. Std)