SEAFARI Mini - SPECIFICATIONS

MODELS PRODUCTION / 24 HRS PRODUCTION / HR WEIGHT
Mini 170 170 Gal / 645 Lit 7 Gal / 26 Lit 70 lbs / 32 kg
Mini 350 350 Gal / 1,325 Lit 15 Gal / 55 Lit 89 lbs / 40.4 kg
Mini 550 550 Gal / 2,080 Lit 23 Gal / 87 Lit 125 lbs / 57 kg
Mini 750 750 Gal / 2,839 Lit 31 Gal / 118 Lit 130 lbs / 59 kg

Electrical

MODEL PHASE PUMP MOTOR VOLTAGE Hz HP RUNNING AMPS START UP AMPS
Mini 170 N/A HP 12 / 24 N/A 0.33 27/13.4 90/45
Mini 170 Single HP 110 / 230 50 // 60 0.33 6.6/3.3//
5.2/2.6
26/13
Mini 350 Single HP 110 / 230 60 1 12.8/6.4 39/20
Mini 350 Single HP 110 / 230 50 1 12.4/6.2 37/19
Mini 750 / 550 Single HP 110/220//
115/230
50/60 1.75//2.1 18.9/9.4//
18.2/9.1
57/28
Mini 750 / 550 Single Booster 110 / 220 50/60 0.5 9.4/4.7-7.4/3.7 28/14

CONFIGURATIONS

 

  • Product Water Produced per hour of operation: +-15% 850 psi / 56 Bar, 77oF / 25oC & 35,000 ppm TDS typical sea water
  • Salt Rejection (Chloride Ion): Minimum 99.2%, Average 99.4%
  • Product Water Temperature: Ambient to feed water temperature.
  • Salinity Monitoring: The salinity monitoring components of the system give a continuous readout in micromhos per cubic centimeter, are temperature compensated, and of a fail safe design.
  • Salinity Range: Designed for seawater use up to 50,000 ppm TDS (Nacl) (typical seawater salinity is 35,000 ppm.)
  • Temperature Range: Min. 33oF / .5oC Max. 122oF / 50oC
  • System Feed Water: Flow: 50Hz, 3.5 gpm / 13.2 lpm; 60Hz, 3 - 4.2 gpm / 11.4 - 15.9 lpm
  • Reverse Osmosis Membrane: High Rejection/High Yield aromatic tri-polyamind, thin film composite, spiral wound, single pass reverse osmosis membrane element.
  • Chlorine Tolerance: 0.1 ppm
  • pH Range: 3-11 (typical seawater pH is 8)
  • System Pressure:
    Feed Water
    Minimum: 6 psi / .41 bar / .42 Kg/cm2
    Maximum: 35 psi / 2.41 bar / 2.46 Kg/cm2
    System Operation
    Seawater @ 35,000 ppm & 77° F / 25° C
    Nominal: 850 psi / 56.5 bar / 57.66 Kg/cm2. (Brackish varies w/ppm)
  • External Installation Water Connections: Pipe sizes supplied by the installer for connection of Horizon Reverse Osmosis supplied components.
    Feed Inlet: 3/4" MNPT (Male National Pipe Thread, Amer. Std)
    Brine Discharge: 1/2" FNPT (Male National Pipe Thread, Amer. Std)
    Product: 3/8" FNPT (Female National Pipe Thread, Amer. Std)