1. What are the Installation requirements?
- A dedicated Thru-Hull Inlet fitting and a Sea Cock Valve.
- An over board Thru-Hull Discharge fitting.
- A Product Water Tank Fill line connection.
- An Electrical Circuit Breaker and Electrical Wiring.
>back to FAQ's

2. Where on the boat can it be installed?
Anywhere. The typical choice is the engine room, but lazeretts, closets, under settees, or any other available space is acceptable.
>back to FAQ's

3. What size thru-hull is required?
From ½” to 1” depending on the watermaker.
>back to FAQ's

4. Can I have an above water line installation?
Yes. The watermaker may be above water level, however the Booster Pump (supplied with the watermaker) should be below water line.
>back to FAQ's

5. Is a self (owner) installation recommended?
Installing the necessary thru-hull fittings and electrical service should be performed by qualified and experienced technicians. Installation of the watermaker itself requires basic mechanical experience and may be performed by the user. Our comprehensive Owners Manual takes the installer through the process step-by-step.
>back to FAQ's