System Specifications:
Product Water Produced per hour of operation:
+-15% 850 psi / 56 Bar, 77oF / 25oC & 35,000 ppm TDS typical sea water
Model |
Production Per Hour |
Production Per 24 Hours |
gallons / liters |
gallons / liters |
|
SFC 450-1 |
19 / 71
|
450 / 1,703 |
SFC 700-1 |
29 / 110
|
700 / 2,650 |
SFC 900-1 |
38 / 142
|
900 / 3,407 |
SFC 900-2 |
38 / 142
|
900 / 3,407 |
SFC 1400-2 |
58 / 221
|
1,400 / 5,300 |
SFC 1800-2 |
75 / 284 |
1,800 / 6,814 |
Salt Rejection (Chloride Ion):
Minimum 99.2%, Average 99.4%
Product Water Temperature:
Ambient to feed water temperature.
Salinity Monitoring:
The salinity monitoring components of the system give a continuous readout in micromhos per cubic centimeter, are temperature compensated, and of a fail safe design.
Salinity Range:
Designed for seawater use up to 50,000 ppm TDS (Nacl) (typical seawater salinity is 35,000 ppm.)
Temperature Range:
Min. 33oF / .5oC Max. 122oF / 50oC
System Feed Water:
Flow: 50Hz, 3.5 gpm / 13.2 lpm; 60Hz, 3 - 4.2 gpm / 11.4 - 15.9 lpm
Reverse Osmosis Membrane:
High Rejection/High Yield aromatic tri-polyamind, thin film composite, spiral wound, single pass reverse osmosis membrane element.
Chlorine Tolerance:
0.1 ppm
pH Range:
3-11 (typical seawater pH is 8)
System Pressure:
Feed Water:
Minimum: 6 psi / .41 bar / .42 Kg/cm2
Maximum: 35 psi / 2.41 bar / 2.46 Kg/cm2
System Operation:
Seawater @ 35,000 ppm & 77° F / 25° C
Nominal: 850 psi / 56.5 bar / 57.66 Kg/cm2. (Brackish varies w/ppm)
Weight:
Model |
Weight |
gallons / liters |
|
SFC 450-1 |
118 lbs / 54 Kg |
SFC 700-1 |
125 lbs / 57 Kg |
SFC 900-1 |
136 lbs / 62 Kg |
SFC 900-2 |
136 lbs / 62 Kg |
SFC 1400-2 |
147 lbs / 67 Kg |
| SFC 1800-2 | 150 lbs / 68 Kg |
External Installation Water Connections:
Pipe sizes to be supplied by the installer for connection of the Horizon Reverse Osmosis supplied components.
| Feed Inlet: | 3/4" MNPT (Male National Pipe Thread, Amer. Std) |
| Brine Discharge: | 1/2" FNPT (Male National Pipe Thread, Amer. Std) |
| Product: | 3/8" FNPT (Female National Pipe Thread, Amer. Std) |
Electrical - High Pressure Pump Motor and Booster Pump:
450-1 & 900-2 • 60 Hz • 1 & 3 Phase:
Phase |
Hz |
Voltage |
HP |
Running Amps |
Start Up Amps |
1 |
60 |
115 |
2.1 |
28 |
93 |
1 |
60 |
220 |
2.1 |
14 |
47 |
3 |
60 |
220 |
3.0 |
12 |
30 |
3 |
60 |
440 |
3.0 |
6 |
15 |
450-1, 700-1, 900-1, 900-2, 1400-2, & 1800-2 • 50/60 Hz • 1 & 3 Phase:
Phase |
Hz |
Voltage |
HP |
Running Amps |
Start Up Amps |
1 |
50/60 |
115 |
2.5 |
30 |
103 |
1 |
50/60 |
220 |
2.5 |
15 |
52 |
3 |
50/60 |
220 |
3.0 |
12 |
30 |
3 |
50/60 |
440 |
3.0 |
6 |
15 |