System Specifications:
Product Water Produced per hour of operation:
+-15% 850 psi / 56 Bar, 77oF / 25oC & 35,000 ppm TDS typical sea water
Model |
Production Per Hour |
Production Per 24 Hours |
gallons/liters |
gallons/liters |
|
SEC 200 |
8.3 / 31.5 |
200 / 757 |
SEC 400 |
16.7 / 63.1 |
400 / 1,514 |
SEC 600 |
25 / 94.6 |
600 / 2,271 |
Salt Rejection (Chloride Ion):
Minimum 99.2%, Average 99.4%
Product Water Temperature:
Ambient to feed water temperature.
Salinity Monitoring:
Automatic computer controlled electronic monitoring. Temperature compensated with the Water Quality Indicator. The salinity monitoring components of the system give a continuous readout in micromhos per cubic centimeter, are temperature compensated and of a fail-safe design.
Salinity Range:
Seawater use up to 50,000 ppm TDS (Nacl)
(typical seawater salinity is 35,000 ppm.)
Temperature Range:
Min. 33oF / .5oC Max. 122oF / 50oC
Reverse Osmosis Membrane:
TYPE: Specifically selected High Rejection / High Yield aromatic tri-polyamid, thin film composite, spiral wound, single pass reverse osmosis membrane element.
Chlorine Tolerance:
0.1 ppm
pH Range:
3-11 (typical seawater pH is 8)
System Pressure:
Feed Water From The Feed Water Pump Inlet to the Energy Transfer Device:
Nominal at 35,000 ppm TDS feed water salinity and 77°F / 25°C
SEC 200 |
100 psi / 6.90 bar / 7.03 Kg/cm2 / 689.5 kPa |
SEC 400 |
110 psi / 7.58 bar / 7.73 Kg/cm2 / 758.5 kPa |
SEC 600 |
160 psi / 11.03 bar / 11.25 Kg/cm2 / 1,103.2 kPa |
Operation Pressure at the R.O. Membrane Element:
Nominal at 35,000 ppm TDS feed water salinity and 77oF / 25oC
SEC 200 |
600 psi / 41.37 bar / 42.18 Kg/cm2 / 4,137 kPa |
SEC 400 |
625 psi / 43.09 bar / 43.94 Kg/cm2 / 4,309 kPa |
SEC 600 |
825 psi / 56.88 bar / 58.00 Kg/cm2 / 5,688 kPa |
Weight:
Model Number |
Weight |
SEC 200 |
125 lbs / 59 Kg |
SEC 400 |
140 lbs / 63 Kg |
SEC 600 |
150 lbs / 68 Kg |
External Installation Water Connections:
Pipe sizes to be supplied by the installer for connection of the Horizon Reverse Osmosis supplied components.
| Feed Inlet: | 1/2" Male NPT |
| Brine Discharge: | 1/2" Male NPT |
| Product: | 1/4" Female NPT |
Electrical Power Specifications:
Nominal Operating Power Consumption in Amperes:
Amperes listed are nominal operating amperes when the feed water conditions are 35,000 PPM TDS Salinity and 77°F / 25°C. Power consumption will vary depending upon individual R.O. Membrane Element, the condition of the R.O. Membrane Element, Feed Water Temperature, and Feed Water Salinity.
Electrical - High Pressure Pump Motor:
Escape 200:
Phase |
Hz |
Voltage |
HP |
Running Amps |
Start Up Amps |
N/A |
N/A |
12V DC |
0.33 |
13 |
95 |
N/A |
N/A |
24V DC |
0.33 |
7 |
48 |
1 |
50/60 |
115 |
0.33 |
5.1 |
15 |
1 |
50/60 |
220 |
0.33 |
2.5 |
8 |
Escape 400:
Phase |
Hz |
Voltage |
HP |
Running Amps |
Start Up Amps |
N/A |
N/A |
12V DC |
0.33 |
22 |
95 |
N/A |
N/A |
24V DC |
0.33 |
11 |
48 |
1 |
50/60 |
115 |
0.33 |
6.7 |
15 |
1 |
60/60 |
220 |
0.33 |
3.3 |
8 |
Escape 600:
Phase |
Hz |
Voltage |
HP |
Running Amps |
Start Up Amps |
N/A |
N/A |
24V DC |
0.5 |
22 |
60 |
1 |
50/60 |
115 |
0.5 |
12 |
33 |
1 |
50/60 |
220 |
0.5 |
6 |
15 |