System Specifications:
Product Water Produced per hour of operation:
+-15% 850 psi / 56 Bar, 77oF / 25oC & 35,000 ppm TDS typical sea water
Model |
Production Per Hour |
Production Per 24 Hours |
gallons/liters |
gallons/liters |
|
Mini 170 |
7 / 26.8 |
170 / 644 |
Mini 350 |
14.6 / 55.2 |
350 / 1,325 |
Mini 550 |
23 / 87 |
550 / 1,900 |
Mini 750 |
31 / 117 |
750 / 2,850 |
Salt Rejection (Chloride Ion):
Minimum 99.2%, Average 99.4%
Product Water Temperature:
Ambient to feed water temperature.
Salinity Monitoring:
The salinity monitoring components of the system give a continuous readout in micromhos per cubic centimeter, are temperature compensated, and of a fail safe design.
Salinity Range:
Designed for seawater use up to 50,000 ppm TDS (Nacl) (typical seawater salinity is 35,000 ppm.)
Temperature Range:
Min. 33oF / .5oC Max. 122oF / 50oC
System Feed Water:
Flow: 50Hz, 3.5 gpm / 13.2 lpm; 60Hz, 3 - 4.2 gpm / 11.4 - 15.9 lpm
Reverse Osmosis Membrane:
TYPE: Specifically selected High Rejection / High Yield aromatic tri-polyamid, thin film composite, spiral wound, single pass reverse osmosis membrane element.
Chlorine Tolerance:
0.1 ppm
pH Range:
3-11 (typical seawater pH is 8)
System Pressure:
Feed Water:
Minimum: 2 psi / .14 bar / .14 Kg/cm2
Maximum: 30 psi / 2.07 bar / 2.11 Kg/cm2
System Operation:
Seawater @ 35,000 ppm & 77° F / 25° C
Nominal: 850 psi / 58.6 bar / 59.76 Kg/cm2. (Brackish varies w/ppm)
Weight:
Model Number |
Weight |
Seafari Mini 170 Seafari Mini 350 Seafari Mini 550 Seafari Mini 750 |
70 lbs / 32 Kg 125 lbs / 57 Kg 125 lbs / 57 kg 130 lbs / 59 kg |
External Installation Water Connections:
Pipe sizes to be supplied by the installer for connection of the Horizon Reverse Osmosis supplied components.
| Seafari 170 | |
| Feed Inlet: | 1/2” MNPT Male National Pipe Thread U.S. Standard |
| Brine Discharge: | 1/2” MNPT Male National Pipe Thread U.S. Standard |
| Product: | 1/4” FNPT Female National Pipe Thread U.S. Standard |
| Seafari 350 | |
| Feed Inlet: | 1/2” MNPT Male National Pipe Thread U.S. Standard |
| Brine Discharge: | 1/2” MNPT Male National Pipe Thread U.S. Standard |
| Product: | 1/4” FNPT Female National Pipe Thread U.S. Standard |
| Seafari 550 / 750 | |
| Feed Inlet: | 3/4” MNPT Male National Pipe Thread U.S. Standard |
| Brine Discharge: | 1/2” MNPT Male National Pipe Thread U.S. Standard |
| Product: | 3/8” FNPT Female National Pipe Thread U.S. Standard |
Electrical - High Pressure Pump Motor and Booster Pump:
Mini 170 ( High Pressure and Booster Pump):
Phase |
Hz |
Voltage |
HP |
Running Amps |
Start Up Amps |
NA |
NA |
12 V DC |
0.33 |
29 |
90 |
NA |
NA |
24 V DC |
0.33 |
14 |
45 |
1 |
50/60 |
115 |
0.33 |
6 |
20 |
1 |
50/60 |
220 |
0.33 |
3 |
10 |
Mini 350 (High Pressure and Booster Pump):
Phase |
Hz |
Voltage |
HP |
Running Amps |
Start Up Amps |
1 |
50/60 |
115 |
1 |
21 |
70 |
1 |
50/60 |
220 |
1 |
10 |
35 |
Mini 550 / 750:
| Pump | Phase |
Hz |
Voltage |
HP |
FLA |
LRA |
| HP | 1 |
50/60 |
110/220 |
2 |
28 / 14 |
93 / 47 |
| Booster | 1 |
50/60 |
110/220 |
1/2 |
8 / 4 |
28 / 14 |